1．該板型板底平坦、腹板貼合，可根據各種房間的不同功用和需求供應多種板底天花處理方式。
1. The plate bottom of the plate type is flat and the web is fitted. A variety of plate bottom and ceiling treatment methods can be provided according to the different functions and needs of various rooms.
2．樓承板閉口截面重心距板底16mm左右，小于開口型或縮口型樓承板截面參數，按塑性理論分析組合樓板結構承載力時，混凝土壓力合力中心與拉力合力中心具有更大的內力臂，這表明資料強度發揮更充沛，因而閉口組合樓板具有更大的結構承載力或者說具有更高的安全系數；
2. The center of gravity of the closed section of the floor bearing plate is about 16mm away from the bottom of the plate, which is less than the section parameters of the open or shrinkage floor bearing plate. When the bearing capacity of the composite floor structure is analyzed according to the plastic theory, the concrete pressure resultant force center and tension resultant force center have a larger internal force arm, which indicates that the data strength is more abundant, Therefore, the closed composite floor has greater structural bearing capacity or higher safety factor;

3．閉口樓承板能夠徹底代替樓板中正彎矩受拉鋼筋而且無須噴刷防火涂料即可抵達2小時的耐火時效；
3. The closed floor bearing plate can completely replace the tensile reinforcement with positive bending moment in the floor slab, and can reach the fire resistance aging of 2 hours without spraying fireproof paint;
4．閉口樓承板肋角使混凝土對樓承板的握裹力更強，組合樓板抵達實在的組合效果；
4. The rib angle of the closed floor bearing plate makes the concrete have a stronger grip on the floor bearing plate, and the composite floor slab achieves a real combination effect;
5．閉口樓承板組合樓板能夠減小樓板厚度，增大凈空高度。選用開口樓承板，小板厚需126mm，而選用該板型小只需104mm；
5. The closed floor bearing plate composite floor can reduce the floor thickness and increase the clearance height. Open floor bearing plate shall be selected, and the thickness of small plate shall be 126mm, while the minimum thickness of this plate type shall be 104mm;
6．閉口樓承板一同的卡槽懸吊體系能為建筑物板底機電管道設備供應便當，該體系無需在板底打眼或預埋鐵件，只需輕松將兩只卡片刺進板底溝槽內，便可供應200kg吊重吊點，拆開也很便當；
6. The card slot suspension system together with the closed floor bearing plate can provide convenience for the electromechanical pipeline equipment at the bottom of the building plate. The system does not need to drill holes or embed iron parts at the bottom of the plate. It can provide 200kg lifting points by easily inserting two cards into the groove at the bottom of the plate, and it is also easy to disassemble;
今天的分享就是關于濟南樓承板，更多的內容小編會不斷的再此分享，更多的內容請繼續關注我們：http://m.cq4du.com
Today's sharing is about Jinan floor support plate. More content will be shared here. Please continue to pay attention to us: http://m.cq4du.com